 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : EN5279B CMOS LSI LC4100C LCD Dot Matrix Common Driver for STN Displays Overview The LC4100C is a common driver for large-scale dot matrix LCD panels. It includes a 240-bit bidirectional shift register and 4-level LCD driver circuits. The number of bits can be further increased by using the provided input and output pins to connect multiple LC4100Cs in cascade. The LC4100C and LC4101C form a large-screen LCD panel driver chip set. Features * * * * * * * * * * Fabricated in a CMOS (P-sub) high-voltage process. LCD drive voltage: 36 V Logic system power-supply voltage: 3.0 to 5.5 V fload max: 1 MHz Slim chip (output pads are concentrated on one of the longer sides) 240 outputs (pad pitch: 70 m) Bidirectional shift register The shift register can be split into two 120-bit registers. DISPOFF function that locks the drive voltages output to the LCD at fixed levels. Display duty: 1/160 to 1/480 Specifications Absolute Maximum Ratings at Ta = 25C 2C, standard VSS, VEEn = VEE1 or VEE2, VSSn = VSS1 or VSS2 Parameter Symbol VDD Supply voltage VEEn VSSn VIN Input voltage V0, V1 V4 V5 Operating temperature Storage temperature Topr Tstg LOAD, L/R, DISP, DF, EIO1, EIO3, EIO4 Conditions Ratings -0.3 to +7 -0.3 to +40 -0.3 to +0.3 -0.3 to VDD + 0.3 VEE - 7 to VDD + 0.3 -0.3 to VSS + 7 -0.3 to +0.3 -20 to +75 -55 to +125 Unit V V V V V V V C C Note: The voltages V1, V2, V3, V4, and V5 must obey the relationships VEEn + 0.3 V0 V1 VEE - 7, and 7 V4 V5 VSSn - 0.3. (Unit: V) SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 93096HA (OT)/31596HA (OT) No. 5279-1/8 LC4100C Allowable Operating Ranges at Ta = -20 to +75C, standard VSS, VEEn = VEE1 or VEE2, VSSn = VSS1 or VSS2 Parameter Symbol VDD Supply voltage VEEn VSSn Input high-level voltage Input low-level voltage VIH VIL V0, V1 Input voltage V4 V5 Clock frequency VDD = 5 V 10% High-level clock pulse width EIO input setup time EIO input hold time Clock frequency VDD = 3 to 4.5 V High-level clock pulse width EIO input setup time EIO input hold time fload tw (ldh) tsu (ei) tho (ei) fload tw (ldh) tsu (ei) tho (ei) LOAD, L/R, DISP, DF, EIO1, EIO3, EIO4 LOAD, L/R, DISP, DF, EIO1, EIO3, EIO4 V0, V1 V4 V5 LOAD LOAD LOAD, EIO1, EIO3, EIO4 LOAD, EIO1, EIO3, EIO4 LOAD LOAD LOAD, EIO1, EIO3, EIO4 LOAD, EIO1, EIO3, EIO4 120 120 40 50 100 30 200 0.8 VDD 0 VEEn - 7 0 0 1 Conditions Ratings min 3.0 20 0 VDD 0.2 VDD VEEn VEEn + 7 typ max 5.5 36 Unit V V V V V V V V MHz ns ns ns kHz ns ns ns Note: 1. The voltages V1, V2, V3, V4, and V5 must obey the relationships VEEn V0 V1 VEE - 7, and 7 V4 V5 VSSn. (Unit: V) 2. When turning on the power supplies, first turn on the logic system power supply and then turn on the high-voltage system power supply; alternatively, turn both on at the same time. When turning off the power supplies, first turn off the high-voltage system power supply and then turn off the logic system power supply; alternatively, turn both off at the same time. Electrical Characteristics at Ta = -20 to +75C, standard VSS, VDD = 3 to 5.5 V Parameter Input high-level current Input low-level current Output high-level voltage Output low-level voltage Output on resistance Symbol IIH IIL VOH VOL ROUT Conditions VIN = VDD: LOAD, L/R, DISP, DF, EIO1, EIO3, EIO4 VIN = VSS: LOAD, L/R, DISP, DF, EIO1, EIO3, EIO4 IO = -0.4 mA: EIO1, EIO4 IO = 0.4 mA: EIO1, EIO4 VEE1, VEE2 = 20 V, V0 = 20 V, V0 - V0 = 0.5 V, V1 = 20 V, V1 - V0 = 0.5 V, V4 = 0 V, V0 - V4 = 0.5 V, V5 = 0 V, V0 - V5 = 0.5 V: OUT1 to OUT240 VDD = 3 to 5.5 V, fcp = 50 kHz, fDF = 100 Hz, with no output load VEEn = 36 V, 1 data shift -1 0.8 VDD VSS 0.3 VDD 0.2 VDD 0.6 Ratings min typ max 1 Unit A A V V k Current drain (1) Current drain (2) IDD IEE 300 750 A A No. 5279-2/8 LC4100C Block Diagram Switching Characteristics at VDD = 5 V 10%, Ta = -20 to +75C Parameter EIO output delay time LOAD-OUTn delay time DF-OUTn delay time Symbol td (eo) td (ldo) td (dfo) Conditions 30 pF capacitance load: LOAD, EIO1, EIO4 100 pF capacitance load: LOAD, OUTn 100 pF capacitance load: DF, OUTn Ratings min typ max 180 700 1.2 Unit ns ns s Switching Characteristics at VDD = 3 to 4.5 V, Ta = 25C 2C Parameter EIO output delay time LOAD-OUTn delay time DF-OUTn delay time Symbol td (eo) td (ldo) td (dfo) Conditions 30 pF capacitance load: LOAD, EIO1, EIO4 100 pF capacitance load: LOAD, OUTn 100 pF capacitance load: DF, OUTn Ratings min typ max 350 3 3 Unit ns s s No. 5279-3/8 LC4100C Pin Functions Symbol I/O LCD drive outputs DF 0 OUT1 to OUT240 O 1 0 1 * Data 1 0 0 1 * DISP 1 1 1 1 0 OUTn V0 V1 V4 V5 V5 Function Note: * don't care (0 or 1). These values must be fixed at either 0 or 1. V0 V1 V4 V5 VEE1/VEE2 VSS1/VSS2 DISP DF LOAD L/R CH120 I I I I - - I I I I I V0 level drive voltage input V1 level drive voltage input V4 level drive voltage input V5 level drive voltage input All pins with the same name must be set to the same potential. High-voltage block power supply. VEE1 and VEE2 must have the same potential. High-voltage block ground. VSS1 and VSS2 must have the same potential. All outputs will be held at a fixed V5 level when this pin is low. Alternation input Data shift pulse input (falling edge) Data shift direction specification input High: 120 x 2, low: 240 x 1 Enable inputs and outputs L/R CH120 L H L H EIO1 OUT1 EIO1 OUT1 EIO3 OUT121 EIO1 OUT1 EIO1 OUT1 OUT121 Shift direction OUT240 EIO4 OUT120 OUT240 EIO4 OUT240 EIO4 OUT120 EIO3 OUT240 EIO4 EIO1 EIO3 EIO4 I/O I I/O H H L L VDD VSS -- -- Logic system power supply Logic system ground No. 5279-4/8 LC4100C Pad Assignment No. 5279-5/8 LC4100C Pad Coordinates Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Signal OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9 OUT10 OUT11 OUT12 OUT13 OUT14 OUT15 OUT16 OUT17 OUT18 OUT19 OUT20 OUT21 OUT22 OUT23 OUT24 OUT25 OUT26 OUT27 OUT28 OUT29 OUT30 OUT31 OUT32 OUT33 OUT34 OUT35 OUT36 OUT37 OUT38 OUT39 OUT40 OUT41 OUT42 OUT43 OUT44 OUT45 OUT46 OUT47 OUT48 OUT49 OUT50 X coordinate -8365 -8295 -8225 -8155 -8085 -8015 -7945 -7875 -7805 -7735 -7665 -7595 -7525 -7455 -7385 -7315 -7245 -7175 -7105 -7035 -6965 -6895 -6825 -6755 -6685 -6615 -6545 -6475 -6405 -6335 -6265 -6195 -6125 -6055 -5985 -5915 -5845 -5775 -5705 -5635 -5565 -5495 -5425 -5355 -5285 -5215 -5145 -5075 -5005 -4935 Y coordinate 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 Pad No. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Signal OUT51 OUT52 OUT53 OUT54 OUT55 OUT56 OUT57 OUT58 OUT59 OUT60 OUT61 OUT62 OUT63 OUT64 OUT65 OUT66 OUT67 OUT68 OUT69 OUT70 OUT71 OUT72 OUT73 OUT74 OUT75 OUT76 OUT77 OUT78 OUT79 OUT80 OUT81 OUT82 OUT83 OUT84 OUT85 OUT86 OUT87 OUT88 OUT89 OUT90 OUT91 OUT92 OUT93 OUT94 OUT95 OUT96 OUT97 OUT98 OUT99 OUT100 X coordinate -4865 -4795 -4725 -4655 -4585 -4515 -4445 -4375 -4305 -4235 -4165 -4095 -4025 -3955 -3885 -3815 -3745 -3675 -3605 -3535 -3465 -3395 -3325 -3255 -3185 -3115 -3045 -2975 -2905 -2835 -2765 -2695 -2625 -2555 -2485 -2415 -2345 -2275 -2205 -2135 -2065 -1995 -1925 -1855 -1785 -1715 -1645 -1575 -1505 -1435 Y coordinate 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 Continued on next page. No. 5279-6/8 LC4100C Continued from preceding page. Pad No. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Signal OUT101 OUT102 OUT103 OUT104 OUT105 OUT106 OUT107 OUT108 OUT109 OUT110 OUT111 OUT112 OUT113 OUT114 OUT115 OUT116 OUT117 OUT118 OUT119 OUT120 OUT121 OUT122 OUT123 OUT124 OUT125 OUT126 OUT127 OUT128 OUT129 OUT130 OUT131 OUT132 OUT133 OUT134 OUT135 OUT136 OUT137 OUT138 OUT139 OUT140 OUT141 OUT142 OUT143 OUT144 OUT145 OUT146 OUT147 OUT148 OUT149 OUT150 X coordinate -1365 -1295 -1225 -1155 -1085 -1015 -945 -875 -805 -735 -665 -595 -525 -455 -385 -315 -245 -175 -105 -35 35 105 175 245 315 385 455 525 595 665 735 805 875 945 1015 1085 1155 1225 1295 1365 1435 1505 1575 1645 1715 1785 1855 1925 1995 2065 Y coordinate 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 Pad No. 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Signal OUT151 OUT152 OUT153 OUT154 OUT155 OUT156 OUT157 OUT158 OUT159 OUT160 OUT161 OUT162 OUT163 OUT164 OUT165 OUT166 OUT167 OUT168 OUT169 OUT170 OUT171 OUT172 OUT173 OUT174 OUT175 OUT176 OUT177 OUT178 OUT179 OUT180 OUT181 OUT182 OUT183 OUT184 OUT185 OUT186 OUT187 OUT188 OUT189 OUT190 OUT191 OUT192 OUT193 OUT194 OUT195 OUT196 OUT197 OUT198 OUT199 OUT200 X coordinate 2135 2205 2275 2345 2415 2485 2555 2625 2695 2765 2835 2905 2975 3045 3115 3185 3255 3325 3395 3465 3535 3605 3675 3745 3815 3885 3955 4025 4095 4165 4235 4305 4375 4445 4515 4585 4655 4725 4795 4865 4935 5005 5075 5145 5215 5285 5355 5425 5495 5565 Y coordinate 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 Continued on next page. No. 5279-7/8 LC4100C Continued from preceding page. Pad No. 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 Signal OUT201 OUT202 OUT203 OUT204 OUT205 OUT206 OUT207 OUT208 OUT209 OUT210 OUT211 OUT212 OUT213 OUT214 OUT215 OUT216 OUT217 OUT218 OUT219 OUT220 OUT221 OUT222 OUT223 OUT224 OUT225 OUT226 OUT227 OUT228 OUT229 OUT230 OUT231 X coordinate 5635 5705 5775 5845 5915 5985 6055 6125 6195 6265 6335 6405 6475 6545 6615 6685 6755 6825 6895 6965 7035 7105 7175 7245 7315 7385 7455 7525 7595 7665 7735 Y coordinate 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 727 897 Pad No. 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 Signal OUT232 OUT233 OUT234 OUT235 OUT236 OUT237 OUT238 OUT239 OUT240 VEE1 V0 V1 V5 V4 VSS1 VDD EIO4 EIO3 EIO1 VSS LOAD DF DISP L/R CH120 VSS2 V4 V5 V1 V0 VEE2 X coordinate 7805 7875 7945 8015 8085 8155 8225 8295 8365 8295 7895 7495 7095 6695 6295 3295 -1295 -1495 -1895 -3095 -3695 -3895 -4095 -4495 -4895 -6295 -6695 -7095 -7495 -7895 -8295 Y coordinate 727 897 727 897 727 897 727 897 727 -886 -863 -859 -859 -859 -859 -870 -870 -870 -870 -887 -870 -870 -870 -870 -870 -859 -859 -859 -859 -863 -886 s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. s Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1996. Specifications and information herein are subject to change without notice. No. 5279-8/8 |
Price & Availability of LC4100C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |